Length [mm]: 1062 mm ; Inner thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M24 x 1,5 RHT mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 52 mm ; Weight [kg]: 11.716 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 120 mm ; Outer thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M24 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Fitting Position: Front Axle Right ; Pipe Ø [mm]: 40 mm ; Weight [kg]: 1.725 kg ; ArticleState: Normal ; General Information: mit Enkomutter
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 1059 mm ; Outer diameter [mm]: 52 mm ; Inner thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M24 x 1,5 mm ; Driver Position: for right-hand drive vehicles ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 52 mm ; Weight [kg]: 11.4 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Axle Version: 8x4/4 ; Length [mm]: 95 mm ; Width [mm]: 68 mm ; Thickness [mm]: 100 mm ; Inner diameter [mm]: 36 mm ; Inner thread [mm]: M26 x 1,5 mm ; Outer thread [mm]: M24 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Fitting Position: Rear Axle left and right ; Weight [kg]: 1.955 kg ; ArticleState: Normal ; General Information: für Lenkhydraulikzylinder, mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 761 mm ; Outer diameter [mm]: 40 mm ; Inner thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M24 x 1,5 mm ; Driver Position: for left-hand drive vehicles ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 40 mm ; Weight [kg]: 7.5 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 120 mm ; Outer diameter [mm]: 27 mm ; Outer diameter [mm]: 70 mm ; Outer thread [mm]: M24 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 RHT mm ; Thread Length [mm]: 85 mm ; Spanner Size: 36 ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Colour: Grey ; Material: Steel ; Rod/Strut: Guide Rod ; Fitting Position: Front Axle left and right ; Fitting Position: Rear Axle left and right ; Pipe Ø [mm]: 40 mm ; Weight [kg]: 1.772 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 116 mm ; Inner thread [mm]: M26 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Spanner Size: 17 ; Cone Size [mm]: 26 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.68 kg ; ArticleState: Normal ; General Information: für Lenkhydraulikzylinder, mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 1053 mm ; Cone Size [mm]: 30 mm ; Pipe Ø [mm]: 50 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: at the intermediate lever ; Fitting Position: from 1st to 2nd control arm ; Centre Distance [mm]: 1940 mm ; Driver Position: for left-/right-hand traffic ; Type: R ; Rod/Strut: Push Rod ; Adjustable: not adjustable ; Length [mm]: 1920 mm ; Cone Size [mm]: 30 mm ; Pipe Ø [mm]: 62 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 1059 mm ; Cone Size [mm]: 30 mm ; Pipe Ø [mm]: 52 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: No longer supplied by manufacturer
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 1059 mm ; Cone Size [mm]: 30 mm ; Pipe Ø [mm]: 52 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: from 1st intermediate lever to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 468 mm ; Pipe Ø [mm]: 38 mm ; Cone Size [mm]: 26 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 1st to 2nd control arm ; Driver Position: for left-/right-hand traffic ; Wheelbase [mm]: 1940 mm ; Driver Cab ID: CR19 ; Supplementary Article/Info 2: Air inlet above driver cab ; Rod/Strut: Push Rod ; Length [mm]: 1921 mm ; Pipe Ø [mm]: 60 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 1st to 2nd control arm ; Driver Position: for left-/right-hand traffic ; Wheelbase [mm]: 1940 mm ; Driver Cab ID: CR19 ; Rod/Strut: Push Rod ; Length [mm]: 1921 mm ; Pipe Ø [mm]: 60 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 1st to 2nd control arm ; Driver Position: for left-/right-hand traffic ; Wheelbase [mm]: 1940 mm ; Rod/Strut: Push Rod ; Length [mm]: 1921 mm ; Pipe Ø [mm]: 60 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: No longer supplied by manufacturer
Fitting Position: Pitman Arm to 1st control arm ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 608 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 1st to 2nd control arm ; Driver Position: for left-/right-hand traffic ; Wheelbase [mm]: 1940 mm ; Driver Cab ID: CR16 ; Rod/Strut: Push Rod ; Length [mm]: 1921 mm ; Pipe Ø [mm]: 60 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 1055 mm ; Pipe Ø [mm]: 50 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 1st to 2nd control arm ; Driver Position: for left-hand drive vehicles ; Wheelbase [mm]: 1795 mm ; Driver Cab ID: CR16 ; Rod/Strut: Push Rod ; Length [mm]: 1776 mm ; Pipe Ø [mm]: 60 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: No longer supplied by manufacturer
Fitting Position: from 1st intermediate lever to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 438.5 mm ; Pipe Ø [mm]: 38 mm ; Cone Size [mm]: 26 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: from 2nd control arm to 2nd FA ; Driver Position: for left-/right-hand traffic ; Rod/Strut: Push Rod ; Length [mm]: 495 mm ; Pipe Ø [mm]: 40 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 1062 mm ; Pipe Ø [mm]: 52 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Length [mm]: 1055 mm ; Pipe Ø [mm]: 50 mm ; Cone Size [mm]: 30 mm ; Supplementary Article/Info 2: with crown nut ; ArticleState: on demand
This website uses cookies to enhance your experience, for analytics and enabling third party features. Find out more about cookies by reading our Cookie Policy. By clicking Accept, you agree to our use of cookies.
Attention!
Cookies are disabled in the browser. It can lead to failures or incorrect work of the website. Please, allow using cookie files for this website (or the browser as a whole) following the browser policy.