Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Parameter: DITAS ; Fitting Position: Front Axle ; Length [mm]: 871 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Engine Code: D6A250 ; Length [mm]: 821 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 8.9 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6A250 ; Length [mm]: 120 mm ; Outer thread [mm]: M22 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.77 kg ; ArticleState: Normal ; General Information: mit Sicherungsmutter
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 871 mm ; Outer diameter [mm]: 42 mm ; Outer thread [mm]: M20 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Driver Position: for left-hand drive vehicles ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 7.2 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6A250 ; Length [mm]: 871 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 42 mm ; Weight [kg]: 7.05 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 03135 ; Length [mm]: 105 mm ; Outer thread [mm]: M24 x 1,5 RHT mm ; Outer thread [mm]: M18 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 22 mm ; Fitting Position: Front Axle left and right ; Pipe Ø [mm]: 30 mm ; Weight [kg]: 0.84 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: D6B250 ; Length [mm]: 145 mm ; Inner thread [mm]: M30 x 1,5 RHT mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Length [mm]: 107 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 28.9 mm ; Fitting Position: Front Axle Right ; Weight [kg]: 1.55 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 893 mm ; Outer diameter [mm]: 40 mm ; Outer thread [mm]: M22 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 mm ; Driver Position: for left-hand drive vehicles ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 40 mm ; Weight [kg]: 6.925 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 821 mm ; Width [mm]: 54 mm ; Thickness [mm]: 102 mm ; Inner thread [mm]: M30 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Fitting Position: Front Axle ; Pipe Ø [mm]: 38 mm ; Weight [kg]: 5.55 kg ; ArticleState: Normal ; General Information: mit Kronenmuttern und Splinten, vom Lenkgetriebe zur 1.
Vorderachse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 18340 ; Length [mm]: 115 mm ; Width [mm]: 35 mm ; Thickness [mm]: 107 mm ; Outer thread [mm]: M20 x 1,5 mm ; Outer thread [mm]: M30 x 1,5 RHT mm ; Cone Size [mm]: 26 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.335 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 871 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 888 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 50 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 871 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Axle Load [t]: 4,7 t ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Length [mm]: 821 mm ; Cone Size [mm]: 26 mm ; Pipe Ø [mm]: 42 mm ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for left-hand drive vehicles ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 870 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Driver Position: for right-hand drive vehicles ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 870 mm ; Cone Size [mm]: 26 mm ; ArticleState: Article to be discontinued
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 42 mm ; Length [mm]: 821 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Rod/Strut: Push Rod ; Cone Pitch: 1/10 ; Diameter [mm]: 50 mm ; Length [mm]: 890 mm ; Cone Size [mm]: 26 mm ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Spring Design: Air Spring ; Spring Type: for vehicles with part-pneumatic suspension ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 52 mm ; Length [mm]: 871 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 9.15 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 867 mm ; Driver Position: for right-hand drive vehicles ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Driver Position: for right-hand drive vehicles ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 821 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 6.82 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Spring Design: Leaf spring ; Spring Design: Parabolic Spring ; Driver Position: for right-hand drive vehicles ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 40 mm ; Length [mm]: 893 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 7.55 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; Length [mm]: 871 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 7.62 kg ; ArticleState: Normal
Fitting Position: Pitman Arm to front axle ; Required quantity: 1 ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 30 mm ; Length [mm]: 978 mm ; Driver Position: for left-hand drive vehicles ; Weight [kg]: 3.98 kg ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Axle Load [t]: 4,7 t ; Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Pitch: 1/10 ; Cone Size [mm]: 26 mm ; Cone Size [mm]: 23.5 mm ; Thread Size: M30 x 1,5 RHT ; Rod/Strut: Push Rod ; ArticleState: Normal
Fitting Position: Pitman arm to 1st front axle ; Length [mm]: 890 mm ; Pipe Ø [mm]: 50 mm ; Cone Pitch: 1/10 ; Cone Size [mm]: 26 mm ; Cone Size [mm]: 23.5 mm ; Thread Size: M30 x 1,5 RHT ; Rod/Strut: Push Rod ; ArticleState: Normal
Length [mm]: 871 mm ; Outer diameter [mm]: 42 mm ; Outer thread [mm]: M 20 x 1,5 mm ; Outer thread [mm]: M 30 x 1,5 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Pipe Ø [mm]: 42 mm ; ArticleState: Normal
Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 893 mm ; Pipe Ø [mm]: 40 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 910 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 870 mm ; Pipe Ø [mm]: 52 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 980 mm ; Pipe Ø [mm]: 30 mm ; Cone Size [mm]: 22 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 821 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 1106 mm ; Pipe Ø [mm]: 52 mm ; Cone Size [mm]: 31.5 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Transmission Number: 5/1 ; Length [mm]: 870 mm ; Pipe Ø [mm]: 42 mm ; Cone Size [mm]: 26 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Length [mm]: 893 mm ; Pipe Ø [mm]: 40 mm ; Cone Size [mm]: 30 mm ; Rod/Strut: Push Rod ; Adjustable: Adjustable on one side ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Paired article numbers: 99 90 3135 ; Length [mm]: 105 mm ; Outer thread [mm]: M24 x 1,5 mm ; Outer thread [mm]: M18 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 22 mm ; Fitting Position: Front Axle left and right ; Pipe Ø [mm]: 30 mm ; Weight [kg]: 0.84 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
This website uses cookies to enhance your experience, for analytics and enabling third party features. Find out more about cookies by reading our Cookie Policy. By clicking Accept, you agree to our use of cookies.
Attention!
Cookies are disabled in the browser. It can lead to failures or incorrect work of the website. Please, allow using cookie files for this website (or the browser as a whole) following the browser policy.